Skip to main content

Protege Vandal Resistant
VOIP Intercom with Camera


Tough, durable, and extremely robust, the Protege Vandal Resistant VoIP Intercom is designed to meet the harshest of environments. VoIP capability allows the Intercom to communicate with any VoIP enabled device, including smartphones, providing the ability to grant entry from virtually anywhere.

  • Vandal resistant design
  • Provides a live video feed to a remote monitoring station, web browser, or Protege GX system
  • Programmable auto-answer
  • Allows control of devices such as lights and doors 
  • Noise reducing functionality to eliminate unwanted noise
  • Optional offline operation
  • Standard wall mounted unit for surface mount installations with optional flush mount kit available


Vandal resistant body protects against malicious damage. The robust construction provides full protection against the elements, making the Intercom suitable for virtually any environment.

Fully VoIP compliant, the Intercom can run as a standalone point-to-point intercom or register as a phone on any VoIP capable PBX to allow normal call operation. Use with an optional VoIP server or PBX to enable complex call routing, allowing communication to multiple stations at once, routing unanswered calls to alternative stations, or diverting calls to different units based on a time schedule.

Provides a live video feed that can be viewed from a remote monitoring station, from a web browser or from within a Protege GX or Protege WX system.

Programmable auto-answer feature provides the ability to receive broadcast announcements or gives the remote caller monitoring capability allowing them to listen in.

Background noise and interference is reduced leaving clear speech, while voice pick-up can be achieved from 5 meters (16ft) away.

The intercom supports standalone operation, allowing you to manage customizable schedules and configure the intercom's onboard output for directly controlling a gate or door lock.

PoE simplifies installation and reduces costs. Because PoE runs data and power together over the same cable, it eliminates the time and overhead associated with AC outlet installations, while providing flexibility of the install location.

Power is provided via a suitable 12VDC supply. Ethernet connection allows for installations that use either a dedicated Protege network (recommended for multiple intercom installations) or that simply connect the Intercom and Protege Integrated System Controller to the buildings existing network.

Integration allows communication to any Protege GX workstation, and provides control of devices such as lights and doors.

The intercom comes as a standard surface mounted product. An optional flush mount kit is available for flush mounted installations.


Ordering Code
PRT-IPIC-POE-C Protege Vandal Resistant VoIP Intercom with Camera
ACC-IPIC-C-FMB Optional Flush Mount Kit with Decor Frame and Brick Box
Power Supply
Operating Voltage 12VDC (9 -16VDC)
Operating Current 1A
Power over Ethernet IEEE 802.3af Class 3
Communication protocol SIP 2.0(RFC-3261)
Speech flow Protocols RTP/SRTP
Decoding G.722 G.711U G.711A G.723.1 G.726-32 G.729AB Codecs
Audio Amplifier 3W
Volume Control Adjustable
Full duplex speakerphone Support (AEC)
Port Recording output One (3.5mm terminal block)
Short circuit input One (3.5mm terminal block)
Short circuit output One Form C relay (3.5mm terminal block) 24V DC 1A
WAN port 10/100BASE-TX s Auto-MDIX, RJ-45
Cables CAT5 or better
Resolution 960p (1280x960 pixels)
Viewing Angle 115° horizontal / 87° vertical
Frame Rate 30 fps
Microphone Omnidirectional
Speaker TY 4 ohm 3W
Environmental IP Rating IP65
Working temperature -40° to 70° Celsius (-40° to 158° Fahrenheit)
Storage temperature -40° to 70° Celsius (-40° to 158° Fahrenheit)
Working humidity 10% to 95%
Wall-Mounted 223 x 130 x 74mm (8.77 x 5.11 x 2.91")
In-Wall 270 x 150 x 61mm (10.6 x 5.9 x 2.4")
Net Weight 1400g (49.4oz)
Gross Weight 1640g (57.8oz)

Regulatory Notices

This equipment carries the RCM label and complies with EMC and radio communications regulations of the Australian Communications and Media Authority (ACMA) governing the Australian and New Zealand (AS/NZS) communities.

Conforms where applicable to European Union (EU) Low Voltage Directive (LVD) 2014/35/EU, Electromagnetic Compatibility (EMC) Directive 2014/30/EU, Radio Equipment Directive (RED)2014/53/EU and RoHS Recast (RoHS2) Directive: 2011/65/EU + Amendment Directive (EU) 2015/863.

This equipment complies with the rules, of the Official Journal of the European Union, for governing the Self Declaration of the CE Marking for the European Union as specified in the above directives.

This equipment carries the UKCA label and complies with all applicable standards.


his is a Class A digital device that meets all requirements of the Canadian Interference-Causing Equipment Regulations.


FCC Rules and Regulations CFR 47, Part 15, Class A.

This equipment complies with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; (2) This device must accept any interference received, including interference that may cause undesired operation.